The LYYN® Hawk Board is the inside PCB solution for your analog PAL/NTSC video

Each video frame is optimized for contrast and color spectrum to make it as “natural” as possible to the human eye. Even the smallest fragments of color and object shape can be extracted from the camera sensor. And all this is done in real-time.

The result is an image that constantly self-adjusts to the environment, and you can focus on mission objectives.

LYYN Inside™
The LYYN Hawk Board™ is the ideal solution for advanced users, product manufacturers and system integrators that want to have lyynification fully integrated into their own solution.

Simple integration
The kit contains all the necessary parts for simple plug-and-play integration. You connect your video either to the board’s micro connectors or to the included standard BNC connector card. The board can be controlled by the manual control panel included or by software over a standard RS232/485 serial interface.

The picture above shows a product that has integrated the LYYN HAWK Board as part of the design. At the bottom left hand corner of the product, you will see the black membrane control panel for making adjustments on the video enhancement settings.

Standard control panel for manual control
A thin “membrane” panel is included, which can be mounted and sealed to a flat surface with the adhesive backing. If the application requires a watertight seal LYYN recommends extra mechanical mounting. The panel is connected to the LYYN Hawk Board with a flat cable (included).

User controls on control panel
• on/off
• lyynification: level, window position, window size
• inverted selection window toggle on/off

Software control
The Hawk Board can be controlled remotely through a standard RS232/485 serial interface over a flat cable connector. A simple standard communications program, like “HyperTerminal” in Windows or “QuickTerm” in Mac OS X, can be used to send ASCII text-based commands. You can also write scripts and software on your own control platform for a more integrated solution.

Video standards
PAL 625-line 25 fps or NTSC 525-line 30 fps, autosensing of format. Standard composite or S-video (separate luminance and chrominance).

Video synchronization
The LYYN Hawk Board has three video synchronization modes:

– the video output can be synchronized to the video input
– an external synchronization signal on a separate micro connector can be used
– an Time Based Corrected signal can be obtained by controlling the delay

Physical connectors
Video I/O: Hirose microconnectors. Separate video connector board with standard BNC connectors and cables included External sync signal: Hirose microconnector Two control ports, one for the control panel included and one for software control through an RS interface.



Available lyynification settings
  • level
  • window position
  • window size
  • inverted selection window toggle on/off
  • Other video settings



  • saturation
  • hue
  • brightness
  • contrast
  • sharpness
  • Dimensions and weight Hawk Board: 96 mm x 80 mm x 30 mm
    Weight: 150 g
    Mounting holes: 4 x M3
    Control panel: 80 mm x 50 mm x 1 mm
    Power Nominal input voltage: 12 V DC, 0.2 A.
    Operating conditions Temperature: 0 — 50 °C (32 — 122 °F)
    Humidity: 0 — 80% RH (non-condensing)
  • RS232/485 serial protocol
  • ASCII text-based commands
  • Flat cable connector
  • Download brochure – LYYN HAWK Board

    Request for more info